Caterpillar VIMSPC 2015A

John · Jun 17, 2021

Webmaster said: ↑

Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.

Code:

VIMSpc 2015A – Release Notes
July 28, 2015


Versions Shipped with this release
----------------------------------
* VIMSpc version: 2015A build 5.0.8.0
* Database version: 3.1.0
* Master database version: 15.2.0


New Software Features and Updates
---------------------------------
New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them.

  * All previous versions of VIMSpc, including 2013A, 2011A and 2009B.
  * VIMS 3G Connect
  * VIMS Supervisor
  * TPMpc
  * PCSpc

The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions.

    Compatible ECM       VIMSpc 2015A    VIMSpc 2013A    VIMSpc 2011A
    --------------       ------------    ------------    ------------
    A4N4 Stand-alone TPM Yes             No              No
    A5N2 Telematics      Yes             No              No
    A5N2 Cost Reduction  Yes             Yes             No
    A4N4                 Yes             Yes             Yes
    523 (A4G4)           Yes             Yes             Yes
    VIMS ABL2M           Yes             Yes             Yes
    VIMS 68K             Yes             Yes             Yes
    TPM ABL1M            Yes             Yes             No
    TPM Legacy           Yes             Yes             No
    PCS A4M3             Yes             Yes             No
    PCS Legacy           Yes             Yes             No

The following list contains the enhancements and modifications of VIMSpc version 2015A:
  * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8)
  * VIMSpc can no longer be installed on XP systems starting with this version
  * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc.
  * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms.
  * Added support for A5 telematics module and A4 Stand-alone TPM module.
  * Added third party interface (TPI) support.
  * Added support for version 2 of VIMS 3G files.
  * Added support for value point data logger in trend reports.
  * Added support for new productivity files in merge and reports (version 1).
  * Added support for UTC timestamps in VIMS 3G data files.
  * Added support for public J1939 parameters.
  * Improved Ethernet connection.
  * Fixed bugs found in 2013A version.

Installation Requirements
-------------------------
You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules.

System Requirements
-------------------
To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed:

  * IBM PC compatible with Pentium 1 GHz processor or greater
  * 2 GB RAM
  * 500 MB of available hard drive space
  * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions)
  * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware
  * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware
  * Adobe PDF reader
  * Java 6, 7, or 8 (32-bit version)

Support of VIMSpc
-----------------
For assistance with this software, contact your Caterpillar Dealer.

Click to expand...

Thx

cakdi87 · Sep 22, 2021

Webmaster said: ↑

View attachment 126

Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.

Code:

VIMSpc 2015A – Release Notes
July 28, 2015


Versions Shipped with this release
----------------------------------
* VIMSpc version: 2015A build 5.0.8.0
* Database version: 3.1.0
* Master database version: 15.2.0


New Software Features and Updates
---------------------------------
New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them.

  * All previous versions of VIMSpc, including 2013A, 2011A and 2009B.
  * VIMS 3G Connect
  * VIMS Supervisor
  * TPMpc
  * PCSpc

The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions.

    Compatible ECM       VIMSpc 2015A    VIMSpc 2013A    VIMSpc 2011A
    --------------       ------------    ------------    ------------
    A4N4 Stand-alone TPM Yes             No              No
    A5N2 Telematics      Yes             No              No
    A5N2 Cost Reduction  Yes             Yes             No
    A4N4                 Yes             Yes             Yes
    523 (A4G4)           Yes             Yes             Yes
    VIMS ABL2M           Yes             Yes             Yes
    VIMS 68K             Yes             Yes             Yes
    TPM ABL1M            Yes             Yes             No
    TPM Legacy           Yes             Yes             No
    PCS A4M3             Yes             Yes             No
    PCS Legacy           Yes             Yes             No

The following list contains the enhancements and modifications of VIMSpc version 2015A:
  * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8)
  * VIMSpc can no longer be installed on XP systems starting with this version
  * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc.
  * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms.
  * Added support for A5 telematics module and A4 Stand-alone TPM module.
  * Added third party interface (TPI) support.
  * Added support for version 2 of VIMS 3G files.
  * Added support for value point data logger in trend reports.
  * Added support for new productivity files in merge and reports (version 1).
  * Added support for UTC timestamps in VIMS 3G data files.
  * Added support for public J1939 parameters.
  * Improved Ethernet connection.
  * Fixed bugs found in 2013A version.

Installation Requirements
-------------------------
You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules.

System Requirements
-------------------
To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed:

  * IBM PC compatible with Pentium 1 GHz processor or greater
  * 2 GB RAM
  * 500 MB of available hard drive space
  * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions)
  * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware
  * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware
  * Adobe PDF reader
  * Java 6, 7, or 8 (32-bit version)

Support of VIMSpc
-----------------
For assistance with this software, contact your Caterpillar Dealer.

Click to expand...

Thanks

Jarallah · Oct 31, 2021

Webmaster said: ↑

View attachment 126

Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.

Code:

VIMSpc 2015A – Release Notes
July 28, 2015


Versions Shipped with this release
----------------------------------
* VIMSpc version: 2015A build 5.0.8.0
* Database version: 3.1.0
* Master database version: 15.2.0


New Software Features and Updates
---------------------------------
New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them.

  * All previous versions of VIMSpc, including 2013A, 2011A and 2009B.
  * VIMS 3G Connect
  * VIMS Supervisor
  * TPMpc
  * PCSpc

The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions.

    Compatible ECM       VIMSpc 2015A    VIMSpc 2013A    VIMSpc 2011A
    --------------       ------------    ------------    ------------
    A4N4 Stand-alone TPM Yes             No              No
    A5N2 Telematics      Yes             No              No
    A5N2 Cost Reduction  Yes             Yes             No
    A4N4                 Yes             Yes             Yes
    523 (A4G4)           Yes             Yes             Yes
    VIMS ABL2M           Yes             Yes             Yes
    VIMS 68K             Yes             Yes             Yes
    TPM ABL1M            Yes             Yes             No
    TPM Legacy           Yes             Yes             No
    PCS A4M3             Yes             Yes             No
    PCS Legacy           Yes             Yes             No

The following list contains the enhancements and modifications of VIMSpc version 2015A:
  * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8)
  * VIMSpc can no longer be installed on XP systems starting with this version
  * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc.
  * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms.
  * Added support for A5 telematics module and A4 Stand-alone TPM module.
  * Added third party interface (TPI) support.
  * Added support for version 2 of VIMS 3G files.
  * Added support for value point data logger in trend reports.
  * Added support for new productivity files in merge and reports (version 1).
  * Added support for UTC timestamps in VIMS 3G data files.
  * Added support for public J1939 parameters.
  * Improved Ethernet connection.
  * Fixed bugs found in 2013A version.

Installation Requirements
-------------------------
You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules.

System Requirements
-------------------
To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed:

  * IBM PC compatible with Pentium 1 GHz processor or greater
  * 2 GB RAM
  * 500 MB of available hard drive space
  * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions)
  * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware
  * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware
  * Adobe PDF reader
  * Java 6, 7, or 8 (32-bit version)

Support of VIMSpc
-----------------
For assistance with this software, contact your Caterpillar Dealer.

Click to expand...

Thanks

haidonginfo · Mar 25, 2022

thanks alot

sahabat diesel · Mar 27, 2022

Webmaster said: ↑

View attachment 126

Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.

Code:

VIMSpc 2015A – Release Notes
July 28, 2015


Versions Shipped with this release
----------------------------------
* VIMSpc version: 2015A build 5.0.8.0
* Database version: 3.1.0
* Master database version: 15.2.0


New Software Features and Updates
---------------------------------
New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them.

  * All previous versions of VIMSpc, including 2013A, 2011A and 2009B.
  * VIMS 3G Connect
  * VIMS Supervisor
  * TPMpc
  * PCSpc

The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions.

    Compatible ECM       VIMSpc 2015A    VIMSpc 2013A    VIMSpc 2011A
    --------------       ------------    ------------    ------------
    A4N4 Stand-alone TPM Yes             No              No
    A5N2 Telematics      Yes             No              No
    A5N2 Cost Reduction  Yes             Yes             No
    A4N4                 Yes             Yes             Yes
    523 (A4G4)           Yes             Yes             Yes
    VIMS ABL2M           Yes             Yes             Yes
    VIMS 68K             Yes             Yes             Yes
    TPM ABL1M            Yes             Yes             No
    TPM Legacy           Yes             Yes             No
    PCS A4M3             Yes             Yes             No
    PCS Legacy           Yes             Yes             No

The following list contains the enhancements and modifications of VIMSpc version 2015A:
  * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8)
  * VIMSpc can no longer be installed on XP systems starting with this version
  * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc.
  * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms.
  * Added support for A5 telematics module and A4 Stand-alone TPM module.
  * Added third party interface (TPI) support.
  * Added support for version 2 of VIMS 3G files.
  * Added support for value point data logger in trend reports.
  * Added support for new productivity files in merge and reports (version 1).
  * Added support for UTC timestamps in VIMS 3G data files.
  * Added support for public J1939 parameters.
  * Improved Ethernet connection.
  * Fixed bugs found in 2013A version.

Installation Requirements
-------------------------
You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules.

System Requirements
-------------------
To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed:

  * IBM PC compatible with Pentium 1 GHz processor or greater
  * 2 GB RAM
  * 500 MB of available hard drive space
  * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions)
  * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware
  * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware
  * Adobe PDF reader
  * Java 6, 7, or 8 (32-bit version)

Support of VIMSpc
-----------------
For assistance with this software, contact your Caterpillar Dealer.

Click to expand...

akucakep · Jul 26, 2022

Webmaster said: ↑

View attachment 126

Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.

Code:

VIMSpc 2015A – Release Notes
July 28, 2015


Versions Shipped with this release
----------------------------------
* VIMSpc version: 2015A build 5.0.8.0
* Database version: 3.1.0
* Master database version: 15.2.0


New Software Features and Updates
---------------------------------
New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them.

  * All previous versions of VIMSpc, including 2013A, 2011A and 2009B.
  * VIMS 3G Connect
  * VIMS Supervisor
  * TPMpc
  * PCSpc

The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions.

    Compatible ECM       VIMSpc 2015A    VIMSpc 2013A    VIMSpc 2011A
    --------------       ------------    ------------    ------------
    A4N4 Stand-alone TPM Yes             No              No
    A5N2 Telematics      Yes             No              No
    A5N2 Cost Reduction  Yes             Yes             No
    A4N4                 Yes             Yes             Yes
    523 (A4G4)           Yes             Yes             Yes
    VIMS ABL2M           Yes             Yes             Yes
    VIMS 68K             Yes             Yes             Yes
    TPM ABL1M            Yes             Yes             No
    TPM Legacy           Yes             Yes             No
    PCS A4M3             Yes             Yes             No
    PCS Legacy           Yes             Yes             No

The following list contains the enhancements and modifications of VIMSpc version 2015A:
  * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8)
  * VIMSpc can no longer be installed on XP systems starting with this version
  * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc.
  * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms.
  * Added support for A5 telematics module and A4 Stand-alone TPM module.
  * Added third party interface (TPI) support.
  * Added support for version 2 of VIMS 3G files.
  * Added support for value point data logger in trend reports.
  * Added support for new productivity files in merge and reports (version 1).
  * Added support for UTC timestamps in VIMS 3G data files.
  * Added support for public J1939 parameters.
  * Improved Ethernet connection.
  * Fixed bugs found in 2013A version.

Installation Requirements
-------------------------
You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules.

System Requirements
-------------------
To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed:

  * IBM PC compatible with Pentium 1 GHz processor or greater
  * 2 GB RAM
  * 500 MB of available hard drive space
  * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions)
  * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware
  * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware
  * Adobe PDF reader
  * Java 6, 7, or 8 (32-bit version)

Support of VIMSpc
-----------------
For assistance with this software, contact your Caterpillar Dealer.

Click to expand...

ALOUNAHA · Nov 1, 2022

[Hi !
Thanks to share this program with community !
Regards.

Dmitry Golubev · Nov 10, 2022

Webmaster said: ↑

View attachment 126

Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.

Code:

VIMSpc 2015A – Release Notes
July 28, 2015


Versions Shipped with this release
----------------------------------
* VIMSpc version: 2015A build 5.0.8.0
* Database version: 3.1.0
* Master database version: 15.2.0


New Software Features and Updates
---------------------------------
New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them.

  * All previous versions of VIMSpc, including 2013A, 2011A and 2009B.
  * VIMS 3G Connect
  * VIMS Supervisor
  * TPMpc
  * PCSpc

The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions.

    Compatible ECM       VIMSpc 2015A    VIMSpc 2013A    VIMSpc 2011A
    --------------       ------------    ------------    ------------
    A4N4 Stand-alone TPM Yes             No              No
    A5N2 Telematics      Yes             No              No
    A5N2 Cost Reduction  Yes             Yes             No
    A4N4                 Yes             Yes             Yes
    523 (A4G4)           Yes             Yes             Yes
    VIMS ABL2M           Yes             Yes             Yes
    VIMS 68K             Yes             Yes             Yes
    TPM ABL1M            Yes             Yes             No
    TPM Legacy           Yes             Yes             No
    PCS A4M3             Yes             Yes             No
    PCS Legacy           Yes             Yes             No

The following list contains the enhancements and modifications of VIMSpc version 2015A:
  * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8)
  * VIMSpc can no longer be installed on XP systems starting with this version
  * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc.
  * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms.
  * Added support for A5 telematics module and A4 Stand-alone TPM module.
  * Added third party interface (TPI) support.
  * Added support for version 2 of VIMS 3G files.
  * Added support for value point data logger in trend reports.
  * Added support for new productivity files in merge and reports (version 1).
  * Added support for UTC timestamps in VIMS 3G data files.
  * Added support for public J1939 parameters.
  * Improved Ethernet connection.
  * Fixed bugs found in 2013A version.

Installation Requirements
-------------------------
You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules.

System Requirements
-------------------
To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed:

  * IBM PC compatible with Pentium 1 GHz processor or greater
  * 2 GB RAM
  * 500 MB of available hard drive space
  * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions)
  * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware
  * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware
  * Adobe PDF reader
  * Java 6, 7, or 8 (32-bit version)

Support of VIMSpc
-----------------
For assistance with this software, contact your Caterpillar Dealer.

Click to expand...

Thanks for support

mitroscat · Mar 18, 2023 at 8:52 PM

Webmaster said: ↑

View attachment 126

Caterpillar's Vital Information Management System (VIMS) is a powerful tool for machine management that provides operators, service personnel and managers information on a wide range of vital machine functions. Numerous sensors are integrated into the vehicle design. If VIMS detects an impeding or abnormal condition in any of the machine's systems, it will alert the operator and instruct them to take appropriate action, whether it's modifying machine operation, notifying the shop of needed maintenance, or performing a safe shutdown of the machine. This improves availability, component life and production while reducing both repair cost and the risk of a catastrophic failure. On Caterpillar Mining Trucks and large Wheel Loaders, VIMS also includes production and performance information. It records the various elements of the truck cycle: load time, travel loaded, dump time, and travel empty, along with delay times. All of this information is used to create useful reports and charts. These reports lead to intelligent analysis and better decision making for a more efficient operation, lowering the cost per ton.

Code:

VIMSpc 2015A – Release Notes
July 28, 2015


Versions Shipped with this release
----------------------------------
* VIMSpc version: 2015A build 5.0.8.0
* Database version: 3.1.0
* Master database version: 15.2.0


New Software Features and Updates
---------------------------------
New VIMSpc software is now available. VIMSpc version 2015A contains functionalities of the following existing software products and serves as replacement for them.

  * All previous versions of VIMSpc, including 2013A, 2011A and 2009B.
  * VIMS 3G Connect
  * VIMS Supervisor
  * TPMpc
  * PCSpc

The table below compare capability to connect to various hardware platforms between VIMSpc 2015A and 2011A versions.

    Compatible ECM       VIMSpc 2015A    VIMSpc 2013A    VIMSpc 2011A
    --------------       ------------    ------------    ------------
    A4N4 Stand-alone TPM Yes             No              No
    A5N2 Telematics      Yes             No              No
    A5N2 Cost Reduction  Yes             Yes             No
    A4N4                 Yes             Yes             Yes
    523 (A4G4)           Yes             Yes             Yes
    VIMS ABL2M           Yes             Yes             Yes
    VIMS 68K             Yes             Yes             Yes
    TPM ABL1M            Yes             Yes             No
    TPM Legacy           Yes             Yes             No
    PCS A4M3             Yes             Yes             No
    PCS Legacy           Yes             Yes             No

The following list contains the enhancements and modifications of VIMSpc version 2015A:
  * Java must be installed by user before installing VIMSpc (supports 32-bit Java versions 6, 7, and 8)
  * VIMSpc can no longer be installed on XP systems starting with this version
  * Includes functionality of VIMSpc 2013A, VIMSpc 2011A, VIMSpc 2009B, VIMS 3G Connect, VIMS Supervisor, PCSpc, and TPMpc.
  * Support VIMS A5, A4, 522, 523, ABL2M, and 68K hardware platforms.
  * Added support for A5 telematics module and A4 Stand-alone TPM module.
  * Added third party interface (TPI) support.
  * Added support for version 2 of VIMS 3G files.
  * Added support for value point data logger in trend reports.
  * Added support for new productivity files in merge and reports (version 1).
  * Added support for UTC timestamps in VIMS 3G data files.
  * Added support for public J1939 parameters.
  * Improved Ethernet connection.
  * Fixed bugs found in 2013A version.

Installation Requirements
-------------------------
You must be an administrator to install VIMSpc. All air cards should be removed and VPN turned off prior to installation and when running VIMSpc while connecting to VIMS3G modules.

System Requirements
-------------------
To successfully run VIMSpc, the following computer hardware, communication hardware and cables, and software are needed:

  * IBM PC compatible with Pentium 1 GHz processor or greater
  * 2 GB RAM
  * 500 MB of available hard drive space
  * Supported OS: Windows 7 and 8 (32-bit and 64-bit versions)
  * RS232 port with 16550AF UART (or compatible) OR USB 1.1 or 2.0 port with a USB to Serial Port adapter (P/N: 370-8059) for use with VIMS Download Cable (P/N: 127-9797) for VIMS ABL & 68K hardware
  * Ethernet port for use with the VIMS 3G Download Cable (P/N: 425-6889) for VIMS 3G hardware
  * Adobe PDF reader
  * Java 6, 7, or 8 (32-bit version)

Support of VIMSpc
-----------------
For assistance with this software, contact your Caterpillar Dealer.

Click to expand...

THANK U

Caterpillar VIMSPC 2015A

John New Member

cakdi87 New Member

Jarallah New Member

haidonginfo New Member

sahabat diesel New Member

akucakep New Member

ALOUNAHA New Member

Dmitry Golubev New Member

mitroscat New Member

Share This Page

Copyright report

Quick Navigation

Like us on Facebook

Donate

Useful Searches

Caterpillar VIMSPC 2015A

John New Member

cakdi87 New Member

Jarallah New Member

haidonginfo New Member

sahabat diesel New Member

akucakep New Member

ALOUNAHA New Member

Dmitry Golubev New Member

mitroscat New Member

Share This Page